Recherche :

Projets en cours : Mick_600 et 6 utilisateurs inconnus

Mot : Pseudo : Filtrer
Bas de page
Auteur	Sujet : New project 150 w g12 lamp&psone 5'' lcd

gmby

hi to all...

Equipments:

1- Ps One 5’ LCD
2- 150 W G12 Metal Halide Lamp(5200 K)
3- F:230 Projection Lens
4- 90 mm condensataur
5- f:210xf:310 mm 7x10''acrylic fresnel
6- 6 cm fan (1 piece)
7- 4 cm fan (2 pieces)
8- IR Filter
9- Balast electronic for 150W HID tridonic.atco
10- Necessary electrical equipments and heat proof cables.
11- Required equipments for modification
12- Surface miror (95x150x3mm)
13- Box 32x24x10.5

i was give this project in to your site but i working on it and now it's very od than the last one.

old project link is :

http://forum.aspect-geek.net/aspec [...] 5816-1.htm

in this project : i used objektive like silar the orijinal projection machines but it's made in cnc machine.i used manuel focus and than we will now put our projection machine every point and the screen everytime looks same perfection.all of the equipent must fited in our case and it's arranged .

we used O.7mm metal for our case.it's the appearance of our case and objetive open and closed

this is the rear appearance of our case and lamp-lcd and open-close button.

it's the upper appearance of our case and light box-opposite of electronic balast.

it's the appearance of light box front side.

it ’s the upper appearance of our case and all of the equipment were fitted.

open and closer(on-off) button also psone adapter.

it's the front and rear appearance of our case

i want to compare real projection with my diy video project.but i can't take a picture in dark light.now i give you both of them external appearance.